Forums » Off-Topic Discussions

LED smart lighting and energy harvesting switches

    • 1929 posts
    February 22, 2019 2:29 AM EST
    RS Components (RS) has added a range of smart LED lighting and energy
    harvesting switches from Sylvania to its distribution range in Europe.

    The
    SylSmart smart lighting gives end users greater control over the lit
    environment, as well as helping enterprises reduce energy costs with
    simplified implementation, comprising flat-panel and circular LED light
    modules, an ambient-light and occupation sensor, and a wall switch,enterprise network products all ready to connect using built-in Bluetooth Low Energy (BLE) technology.

    Installation
    is easy with minimal wiring required, commissioning is straightforward
    through an app-controlled pairing of the components, and the lighting
    system is quickly ready to use. The end user controls the lights via the
    SylSmart mobile app, or wall switches, and can create groups of lights,
    arrange lighting scenarios, and establish turn-on/turn-off and dimming
    presets based on time of day, ambient light, and occupancy. Adding new
    lights, switches or sensors to the network is also fast and easy,
    allowing cost-effective scalability.

    The Syl-Lighter LED II SSC
    is a ceiling-mount recessed circular 21-Watt light unit in an aluminium
    housing designed for a 205mm-diameter cutout. The Start Flat Panel LED
    is a non-dimmable 595mm x 595mm square, 40-Watt unit, 10.5mm high,
    featuring a polycarbonate opal diffuser. Both lamps are cool white,
    4000K CCT, with high colour fidelity at 80 CRI, and connect directly to
    the AC line. Both are featured for full wireless control via the wall
    switch or SylSmart app.

    The SylSmart switch is a white, 2-gang
    wall switch. Built-in wireless and batteryless technologies simplify
    installation, giving freedom to position and re-position as required,
    without the need to add any new wiring. The switch is self-powered
    through built-in energy-harvesting technology, and is surface or
    back-box mountable.

    The SylSmart Standalone wireless room sensor
    monitors ambient light and occupancy, and is designed for flush mounting
    with direct electrical connection to the AC line with no additional
    controls cabling required. It has occupancy detection range of up to
    seven metres, and adjustable time delay from 10 seconds to 99 minutes.